We have technological solutions for business

The close scientific cooperation with the National University of Water and Environmental Engineering, as well as our own developments and research, provide us with modern tools in our work.

WE ARE READY TO HELP IN THE FOLLOWING AREAS

WATER PURIFICATION

LLC COMFORT-ECO closely cooperates with the department of “Water supply, sewerage and drilling” at the National University of Water and Environmental Engineering (Rivne) and offers:

– Water deironing units with polystyrene foam filters with an upward filter flow, which are located in the open air;

– Tower-type water deironing units;

– Polystyrene foam filters for local water purification systems (private houses, cottages, hotels, etc.).

– Complex drinking water purification plants “OZZON”: OZZON office; OZZON-1.5; OZZON-3.

DRINKING WATER PURIFICATION UNITS

Водоподготовка

PURIFICATION QUALITY INDICATORS

 

Name of indicators

Before purification

After purification

Total iron, mg/dm3

up to 16

less than 0.2

Turbidity, NTU*, mg/dm3

up to 50

less than 2

Hydrogen sulfide, mg/dm3

up to 2

removed

Water color, color units

up to 50

less than 20

Total hardness, mol/dm3

up to 9

less than 7

Manganese, mg/dm3

up to 2

less than 0.05

Residual free chlorine, mg/dm3

up to 2

removed

рН

6.5 – 8.5

6.5 – 8.5

* Notes. NTU (nephelometric turbidity unit) 1NTU = 0.58 mg/dm3.

ADVANTAGES OF THE COMPLEX

– Groundwater purification according to the standard requirements of the State Sanitary and Epidemiological Norms 2.2.4-171-10 “Hygienic Requirements for Drinking Water Intended for Human Consumption”;

– Compactness of the complex and, as a result, reduction of the usable area;

– No need for maintenance personnel;

– Significant reduction in the volume of backwash water;

– Reduction of energy consumption;

– Ozone disinfection of water (as an additional function);

– High reliability and low maintenance costs.

NITRATE PURIFICATION OF GROUNDWATER is based on the use of physicochemical methods (for the conversion of nitrates into a solid phase) and hydromechanical methods (for the extraction of the solid phase from water), while minimizing waste generation

SOFTENING, DEMINERALIZATION OF GROUNDWATER OF CHLORIDE-SULPHATE TYPE to provide the required quality of purified water at low operating costs of the units and high efficiency of water use. The issues of eluate utilization during the regeneration of ion exchange filters and water reuse of auxiliary operations have been resolved in contrast to the existing technologies.

MUNICIPAL SECTOR

DOMESTIC WASTEWATER TREATMENT OF AUTONOMOUS OBJECTS – villages, towns, small cities, recreation centers and other local objects by biological methods based on KUBO units by capacity of 1 – 200 m3/day.

The plants (units) are compact and meet the European level, can be made of plastic, reinforced concrete or metal in an above-ground, semi-buried or underground version.

Based on these technological solutions, we reconstruct the operating wastewater treatment facilities using:

– existing volumes of treatment facilities without additional expansion, which allows to increase the capacity of treatment facilities by 1.5-2 times;

– energy-saving pumping equipment;

– efficient and energy-saving aeration equipment and systems.

TECHNOLOGIES FOR WASTEWATER TREATMENT “KUBO”

Domestic wastewater treatment of autonomous objects – private houses, villages, cottages, hotels, schools, recreation centers and other local objects, as well as wastewater similar to them by chemical composition of industrial enterprises by biological methods based on “KUBO” units.

The multi-stage treatment technology is developed on the basis of KUBO units produced according to TU U 45.2-31830396-001-2004 with changes from 02/03/2010 # 097/000915/01 and approved by the Ministry of Health of Ukraine (Conclusion of the State Sanitary and Epidemiological Expertise of 29.04.2013 # 05.03.02-04/33973).

The size of the sanitary protection zone for KUBO units by capacity of 1-200 m3/day is 15 meters.

This technology of wastewater treatment allows to provide the quality of treated water for further discharge into a fishery reservoir of the 2nd category, a stream or for technical needs (watering green areas, washing vehicles, etc.) without harmful effects on the environment and in compliance with the requirements of current regulatory documents.

The treated water is disinfected by a sodium hypochlorite solution or ozonation according to the current standards requirements.

QUALITY INDICATORS OF TREATMENT

Name of indicators

Quality indicators of influent

Quality indicators of effluent

1

Suspended solids

350 mg/l

15 mg/l

2

Mineralization

1100 mg/l

1000 mg/l

3

BOD5

300 mg/l

15 mg/l

4

COD

530 mg/l

80 mg/l

5

Synthetic surfactants

4.0 mg/l

0.2 mg/l

6

Ammonium nitrogen

20 mg/l

1.9 mg/l

7

Nitrites

0.7 mg/l

0.27 mg/l

8

Nitrates

40 mg/l

40 mg/l

9

Sulfates

200 mg/l

200 mg/l

10

Phosphates

10 mg/l

3 mg/l

11

Chlorides

300 mg/l

300 mg/l

12

рН

6.5 – 8.5

6.5 – 8.5

13

Oil products

0.6 mg/l

0.25 mg/l

14

Coli-index

>100000

<1000

* Note. The additional post-treatment unit should be installed to increase the efficiency of wastewater treatment to BOD5 of 3-5 mgO2/l, Suspended Solids of 3 mg/l, and COD of 30 mg/l.

ADVANTAGES OF THE COMPLEX

  • High treatment efficiency – 95-98%;
  • Simplicity of operation and maintenance of the equipment;
  • Small area for treatment facilities location;
  • No need for additional equipment in the building for the location of treatment facilities;
  •  Short time required for equipment delivery and commissioning;
  • Low energy consumption;
  • High quality of treated water that can be used for various technological needs.

CONSTRUCTION OPTIONS OF THE PLANTS

We offer two options for the implementation of a domestic wastewater treatment plant depending on the method of treatment facilities location:

– Combined version of the treatment plant. The main technological tanks are designed from monolithic reinforced concrete, and electrical equipment (blowers) are placed indoors.

– Underground version of the treatment plant. The main technological tanks are made of plastic and placed in reinforced concrete rings, and electrical equipment (blowers) are placed in a separate block. This option does not require a separate room for technological equipment.

WASTEWATER TREATMENT OF SPECIALIZED MEDICAL INSTITUTIONS: TUBERCULOSIS DISPENSARIES, INFECTIOUS DEPARTMENTS OF HOSPITALS Wastewater of medical institutions is similar to composition of domestic wastewater. Their wastewater is treated using the technology of biological wastewater treatment based on KUBO unit. However, the presence of pathogenic microorganisms (e.g., Mycrobacterium tuberculosis) requires the introduction of additional post-treatment units, such as sludge dewatering and disinfection unit generated during the treatment process.

FOOD INDUSTRY

Wastewater treatment of dairy, meat, confectionery, brewing, alcohol, wine, oil and fat and other food industries.

The basis of the technology for treating this category of wastewater is a combination of physical and chemical (pressure flotation, reagent treatment, sedimentation, filtration) and biological (oxidation by microflora) methods. Such a combination of different wastewater treatment methods eliminates the disadvantages of each method and results the efficient treatment.

FLOTTER-PRO physical and chemical water treatment unit is used for the treatment and purification of industrial wastewater and return water from phosphates, total iron, oil products, suspended solids and other pollutants.

The quality of the effluent meets the requirements for discharge into the municipal sewerage system or open water bodies.

ADVANTAGES OF THE TECHNOLOGY

– Stability of treatment quality regardless of fluctuations in pollution concentrations;

– Compactness, reliability and low energy consumption of wastewater treatment equipment;

– Maximum automation and simplicity of operation;

– Payback period of up to 2 years

 

ELECTROPLATING PRODUCTION

Wastewater treatment of washing water, waste concentrated solutions of electroplating and printed circuit board production facilities of machine and instrumentation enterprises at local treatment cycles and at centralized treatment facilities of the enterprise with subsequent effluent discharge into the city sewerage system or its reuse in a closed production cycle.

The important way to solve the environmental protection problem is to create closed-circuit water supply systems for electroplating workshops, which partially or completely eliminate the effluent discharge into a hydroecological reservoir and its reuse in production. This reduces the consumption of fresh water, excludes the discharge of even small amounts of heavy metal ions, reduces treatment costs by saving water consumed at the enterprise and reduces (eliminates) the fee for wastewater discharge into the sewer system or water body.

The proposed integrated wastewater treatment technology for electroplating is based on the use of modern solutions in the field of lighting, filtration, and hydraulics. The high efficiency of the proposed technological scheme and water treatment equipment is achieved through the use of technical solutions and developments that meet international standards.

ADVANTAGES OF THE TECHNOLOGY

– Provision of wastewater treatment to the standards required by the Customer;

– Stabilization and partially desalination of the treated water without the use of additional equipment;

– Significant reduction the doses of chemicals;

– Small amount of waste, which physical, chemical and mechanical properties by composition is suitable for utilization;

– Compact placement of water treatment equipment, reducing the length of communications, the number of valves, pumps and auxiliary equipment;

– Simplicity of operating conditions;

– Reduction of the energy consumption of treatment;

– Significant economic and social effect.

SOLID WASTE LEACHATE

TREATMENT OF LANDFILL LEACHATE AND LIQUID TOXIC WASTE

Based on the developed complex multi-stage technology (Ukrainian patent for invention UA 72677). The efficiency of the technology is achieved through the extraction of components in a form that provides for their utilization, as well as through the recycling of commercial reagents used during regeneration. The prerequisite for leachate treatment is its complete disinfection.

EXTRACTION OF IODINE AND BROMINE

In the form of commercial products – crystalline iodine and ferrous bromide from highly mineralized natural waters. The technology makes it possible to reduce the process equipment used in the traditional scheme by 30-35%. The technology provides for the purification of all components associated with the main process (brines after halogen extraction, air), as well as the subsequent processing of concentrates to extract other valuable elements (lithium, boron, strontium, etc.).

The technologies we offer are environmentally friendly along with being efficient and cost-effective.

Some of the proposed solutions are customized and are the result of studying the customer’s needs, the quality of the source water, and the conditions of future system operation, while others are standardized.

Call us and we will help you!